Two component epoxy resin in combination with selected quartz sand for making a drainage layer and for the preparation of mortar for grouting joints for paving stones.
|Field of use||
Suitable for grouting paving stones, granite cubes and plates made of natural, artificial stone or concrete. The product in combination with the appropriate quartz sand, can be used as a drainage layer on outdoor surfaces. Because of its composition, the surface is fast ready for foot and vehicle trafic. For outdoor and indoor use, for easy and heavy loads. The mixing ratio gives the product its corresponding properties, according to its intended use.
Rapid development of compressive and flexural strenghts.
For outdoor and infoor use
Ready for foor traffic after 12-24 h and after 3 days for full loads
Universal and easy usage
1. EPOXY GROUTING COMPOUND FOR PAVING STONES AND STONE PLATES:
Depending on the width, lenght and depth of the paving stones (stone plates, etc…), and the chosen mix ratio, regarding on the strenghts that are required.
2. DRAINAGE MORTAR:
The consumption of the quartz sand N560S (3,15-5,6 mm) and N800S (5,6-8,0 mm) fraction is approx.: 16 kg/m2 for a layer thickness of 1 cm.
If we take 1,26 kg of epoxy resin and dry quartz sand N800S (5,6-8,0 mm) to prepare a drainage mortar and mix it in a ratio 1:40 – this means mixing 1,26 kg of epoxy resin and 2 bags of 25 kg packed quartz sand N800S in a construction blender.
1,26 kg (0,9 kg of component A and 0,36 kg of component B)