2-component fast – setting epoxy primer, bond old-new and resin for epoxy mortar/epoxy levelling preparation and for fast repairs of cement based substrates. Viscosity of mixture is suitable for filling with quartz Sand.
|Field of use||
For priming of commonly cement based surfaces, for filling of capillaries and pores, for reinforcement and thin-layer levelling, also suitable as bonding bridge “old-new”. It viscosity is suitable for filling with quartz sand and for epoxy thin-levelling, screeds and mortars.
For outdoor and indoor use.
Enables application of final layer in one day
Fast development ot compressive and tensile strenghts
Short open time and quick ready for foor trafic
For outdoor and indoor use
Good penetration into the substrate
1. Primer prior to installation of epoxy floor, substrate reinforcement, anti- dust protection coating, bonding layer: 0,3 – 0,5 kg/m2 for one layer, depending on the absorbency of the substrate.
2. Epoxy leveling compound (leveling up to 2 mm): 1,4 to 1,6 kg/m2 for 1 mm thickness (mixing ratio resin: sand = 1:1)
3. Epoxy mortar (15 to 20 mm): 2,2 kg/m2 for 1 mm thickness (mixing ratio resin: sand = 1:7)
26,4 kg (20 kg of component A and 6,4 kg of component B)
6,6 kg (5 kg of component A and 1,6 kg of component B)