2-component impregnating epoxy coating and bond old-new.
|Field of use||
For priming of commonly cement based surfaces, for filling of capillaries and pores, for reinforcement and thin-layer levelling. It is of low viscosity, suitable for filling with quartz sand and for thin epoxy screeds and mortars. For outdoor and indoor use.
High penetration into the substrate
Easy to use
For outdoor and indoor use
1. Primer prior to installation of epoxy floor, substrate reinforcement, anti- dust protection coating, bonding layer: 0,3 – 0,5 kg/m2 for one layer, depending on the absorbency of the substrate.
2. Epoxy leveling compound (leveling up to 2 mm): 1,4 to 1,6 kg/m2 for 1 mm thickness (mixing ratio resin: sand = 1:1)
3. Epoxy mortar (15 to 20 mm): 2,2 kg/m2 for 1 mm thickness (mixing ratio resin: sand = 1:10)
32 kg (20 kg of component A and 12 kg of component B)
Bulk cargo: 200 kg of component A and 200 kg of component B