Description
| Description |
2-component thin-layer polyurethane coating, RAL coloured, suitable for concrete floor protection. Fully cured it displays a slightly shiny surface, which is UV resistant and is easily cleaned. |
| Field of use |
Usually it is applied in one coat while in the case of extreme porosity of substrate two coats are recommended. Suitable for light mechanical loads, while total thickness does not exceed 300 μm. Substrate moisture content shall not be more than 3,5%, measured by the CM method. In case of higher moisture the product should not be installed. |
Features
-
Colours: all colours in accordance with RAL chart
-
Sensitive for high air humidity
-
It can be applied only in thin layer
-
For outdoor and indoor use
-
Pot life: approx. 60 min at +23°C
-
Mixing ratio: A_B=3:1 (w / w)
-
UV resistance
-
When installing lighter shades there can be slight variations in tone of the color, because of colored B component. We recommend prior consultation with the manufacturer.
Consumption
approx. 0,2-0,3 kg/m2 in single coat
Packing
-
20 kg in steel buckets (15 kg component A and 5 kg component B)