2-component self-levelling polyurethane thick coating, RAL coloured, suitable for concrete fl oor protection. Fully cured it displays a slightly shiny and elastic surface, which is well mechanical and chemical resistant and is easily cleaned.
|Field of use||
Usually it is applied in one coat; minimum layer thickness is 1 mm, maximum layer thickness is 3 mm. The second coat is with KEMAPUR C 6000 as final coat if UV stability is necessary. Substrate moisture content shall not be more than 3,5%, measured by the CM method. In case of higher moisture the product should not be installed.
Colours: all colours in accordance with RAL chart* (see below)
Sensitive for high air humidity
Pot life, 20 minutes at +23 °C (100 g)
Mixing ratio: A_B=5:1 (w / w)
For high mechanical loads
When installing lighter shades there can be slight variations in tone of the color, because of colored B component. We recommend prior consultation with the manufacturer.
approx. 1,6-1,7 kg/m2 in single coat 1 mm
24 kg in steel buckets (20 kg component A and 4 kg component B)