A) for embedded assembly for polystyrene and longitudinal mineral fiber insulation. Installation is done using STR tool 2G. The embedded anchor is covered with a plug of the appropriate insulation type. The plug is always ordered separately!
B) for surface mounting for polystyrene, longitudinal and perpendicular mineral fiber insulation. Installation is carried out using the STR-BIT TX30 x 90 Extension Extension. It is necessary to interrupt the thermal bridge with a polystyrene plug STR small plug PS.
Shank diameter: 8 mm
Plate-Ø: 60 mm
Anchor depth for A, B, C, D: 25 mm (concrete, solid, perforated material)
Anchor depth for E: 65 mm (aerated concrete, gas-silicate)
1. Primer prior to installation of epoxy floor, substrate reinforcement, anti- dust protection coating, bonding layer: 0,3 – 0,5 kg/m2 for one layer, depending on the absorbency of the substrate.
2. Epoxy leveling compound (leveling up to 2 mm): 1,4 to 1,6 kg/m2 for 1 mm thickness (mixing ratio resin: sand = 1:1)
3. Epoxy mortar (15 to 20 mm): 2,2 kg/m2 for 1 mm thickness (mixing ratio resin: sand = 1:10)