Description
| Description | Two-component highly elastic cement-based waterproof coating made of a pre-prepared dry cement composition, fillers and additives (component A) and polymer-water dispersion (liquid component B). Suitable also for water reservoars with drinking water. HIDROSTOP ELASTIK is specialy suitable for all surfaces, where cracks are expected, due to dynamic loads and therefore require reliable flexibility of the waterproofing layer and resistance of salt, oil and ammonium sulphate. In accordance with the requirements of EN 14891, it is classified in highest class CM O2 P (CM=liquid installed waterproof coating on cement base, O2=crack overbriding at -20 degrees C, P=with persistance in chlorinated water), for protecting of concrete in accordance with the requirements of EN 1504-2 as a surface coating (C), for controling the moisture content of the concrete (principle MC), with the ability to overcome cracks – class A5 (2,5 mm). |
| Field of use | The coating is waterproof at positive and negative water pressure, water vapour-permeable and frost-resistant. For sealing of balconies, terraces, bathrooms, pools, water reservoirs etc., directly under the tiles, for indoor and outdoor use. |
Features
-
Flexibility
-
Crack over-bridging
-
Frost-resistance
-
Possible application on moist mineral substrate
-
For outdoor and indoor use
-
Resistance to sodium chloride, sea salt, ammonium sulfate and diesel oil
-
Conditionally suitable for drinking water reservoirs
-
Long-term UV stability
Consumption
3-4 kg/m2 for two coats with brush (app. 2 mm thickness)
Packing
-
28 kg complete 20+8 (component A: 20 kg in paper bag (plastificated) and component B: 8 kg in plastic pail)
-
17,5 kg complete 12,5+5 (component A: 12,5 kg in plastic bag and component B: 5 kg in plastic pail)
-
7 kg complete 5+2 (component A: 2 x 2,5 kg in plastic bag and component B: 2 x 1 kg in plastic pail)