Description
| Description | Product for surface protection, hydrophobic impregnation (H) for principles 1.1. protection against penetration of substances; 2.1. protection against moisture; 8.1. increase of resistance. |
| Field of use |
For waterrepellent impregnation and priming of all mineral surfaces such as concrete, mineral plasters, roof tiles, brick, gas concrete, silicate brick, natural and artificial stone, included joints, facades of mineral colours etc.
|
Features
-
Water-based
-
Prevents »efflorescence«
-
Prevents concrete surface damage due to salts and frost
-
It is colourless, water vapour permeable and water-repellent
-
Suitable as a substrate for all coatings
-
Min. 2 coats »wet-to-wet«
-
Facilitates the cleaning of the substrate and hinders the development of micro organisms
-
Because of mineral base and strong silicic bonds with mineral surface stability is prolonged
-
Easy to use
Consumption
approx. 0,2 to 1,0 l / m² depending on the absorption capability of the surface
The required quantity of KEMAFOB AQUA depends on the adsorbency of the substrate. The amount of impregnating agent required for a substrate and the effectiveness of the impregnation should be determined on site by testing a small area of the material to be treated. For this reason, the figures quoted below are intended as a guide only:
- concrete 0,25-0,5 l/m2
- stucco 0,5-1 l/m2
- brickwork 0,4-2 l/m2
- gas concrete 0,59-2 l/m2
- natural and artificial stone 0,05-3 l/m2
Packing
-
1 kg in plastic can / 8 kg (8×1 kg) in carton box / 576 kg (72×8 kg) on pallet
-
10 kg in plastic can / 600 kg (60×10 kg) on pallet