KEMAMIX SPX W
White adhesive for gas concrete
Showing all 75 results
White adhesive for gas concrete
Epoxy resin for making grouting mortar for paved surfaces and building a drainage layer.
Epoxy colored binder for making coatings in
White adhesive and levelling mortar for thermal-insulation boards
Synthetic-resin intensive coloured paint
White cement CEM I 52,5 R
Two component epoxy bonding bridge
Polyurethane resin for connecting elements in construction
Cement free mineral fine plaster with natural hydraulic lime as binding agent
Synthetic-resin paint
Finely ground alabaster gypsum
Polymer dispersion for the bonding bridge (bond old-new) for over coating of old concrete surfaces
Adhesive for gas concrete
Epoxy resin for conecting elements in construction
Acid-resistant epoxy adhesive and joint grouting compound
Silicate paint
Primer for highly and medium absorbent mineral surfaces
Rough lime-cement plaster and masonry mortar
Restration plaster based on Roman lime for machine aplication
Adhesive and levelling compound for heat insulating panels
Mortar for stone laying
Silicone paint
Penetration primer for low and medium-absorbent mineral surfaces
Fine lime-cement plaster
Polymer dispersion
White cementitious levelling compound
Fast-setting flexible adhesive for large-sized floor tiles
Fine drying plaster based on Roman lime
Gypsum based levelling compound
Drying plaster based on Roman lime
Polyurethane adhesive for heat insulating panels
Drying plaster
Machine restoration plaster
White flexible adhesive for ceramic tiles and marble
Restoration plaster
Rough lime plaster
Flexible ceramic tile adhesive
White flexible adhesive
Flexible adhesive
Epoxy mat looking final layer on water basis
Universal chloride-free melamine based superplastiser
Chloride-free hardening accelerator
Chemical concrete surface hardener in powder
Chemical concrete surface hardener in liquid form
Universal adhesive for setting granitogres
Water-based final epoxy coating – water-vapour permeable
White ceramic tile adhesive
Chemical-resistant thin-layer epoxy coat
Polypropylene fibers for reinforcing concrete and cement based screeds
Ceramic tile adhesive
2K epoxy thin-layer and self-levelling coating
Ceramic tile adhesive
Epoxy coating for substrates with moisture up to 5%
Epoxy primer
Basic epoxy primer
Basic epoxy fast-setting primer
Basic epoxy primer
Additive for increasing the thixotropy of epoxy resins
Decorative flakes
Powdered chemical admixture for shrinking compensation and plasticizing
Silane-siloxane water-based water-repellent impregnation
Microemulsion for setting capillary moisture barriers
Emulsion for setting capillary moisture barriers
Hydro swelling mastic for sealing on wet areas
Hydrophilic bentonite sealing strip
Polyurethane based water swelling strip
Floor sleeve, dimension 350 x 350 mm
Wall sleeve, dimension 120 x 120 mm
Outside corner element of the sealing ribbon
Inside corner element of the sealing ribbon
Flexible sealling ribbon for construction, working and moving joints and cracks
Self-adhesive sealing ribbon
Self-adhesive sealing ribbon
Sealing ribbon 12 cm
One-component, polyurethane-based putty