2-component middle viscous epoxy primer, bond old-new and resin for epoxy mortar/epoxy levelling preparation. In accordance with EN 13813 SR-B2,0-AR0,5-IR20 thin layer coating/ thin layer screed on base of epoxy resin for indoor and outdoor use.
|Field of use||
For priming of commonly cement based surfaces, for filling of capillaries and pores, for reinforcement and thin-layer levelling. It viscosity is suitable for filling with quartz sand and for epoxy thin-levelling, screeds and mortars.
For outdoor and indoor use.
Good penetration into the substrate
Short open time and quick ready for foot traffic
Easy to use
For outdoor and indoor use
1. Primer prior to installation of epoxy floor, substrate reinforcement, anti- dust protection coating, bonding layer: 0,3 – 0,5 kg/m2 for one layer, depending on the absorbency of the substrate.
2. Epoxy leveling compound (leveling up to 2 mm): 1,4 to 1,6 kg/m2 for 1 mm thickness (mixing ratio resin: sand = 1:1)
3. Epoxy mortar (15 to 20 mm): 2,2 kg/m2 for 1 mm thickness (mixing ratio resin: sand = 1:7)
28 kg (20 kg of component A and 8 kg of component B)
7 kg (5 kg of component A and 2 kg of component B)